Posts

Vintage Thing No.80 - Charleston Special

Image
The Charleston Special - that's what the owner called it and even he wasn't sure this was right.  To anyone expecting to read about 2CVs, sorry - this Charleston Special is based on a Hillman Imp. It turned up at the ARCC (Association of Rootes Car Clubs) Rally at Blenhiem Palace in 2000, intrigued lots of people quite apart from myself and then dropped out of our lives. The owner at the time admitted to not knowing a great deal about it and it was up for sale so probably has changed hands at least once since then. The low pivot point of the front wishbones would hamper off road performance but on road performance must have been like a little go-kart. UVA produced the F30, which was a purely road going version of their Fugitive kit. Apparently too many people were fitting Rover V8s into the back of the off-road rails and making badly over-engined (note that these weren't not well over engineered ) monstrosities. More isn't always more. What I do know is that it...

Vintage Thing No.79 - Shaw Velo

Image
This post is more of a request for more info. Many years ago at a long forgotten location I took these photos of this special. Unfortunately, I did not take a picture of the info presented alongside this bike since this was back in the days before I had my digital camera and had to be a bit more discriminating about what I snapped before the inevitable happened and I ran out of film. All I know is this. I spotted the Shaw Velo at a show up country and Netley Marsh near Southampton suggests itself only because some other photos in the pile that harboured these images suggested they might have have been taken at Netley Marsh. The engine is an ohv Velocette and the frame has plunger rear suspension with Earles-type leading link forks. Best of all, though, are the cable operated twin front discs! The black and white photos that accompanied the thoughtfully provided info are of the bike in competition. If nobody out there can't satisfy my curiosity, I'll approach the Old ...

Vintage Thing No.78 - Pinto powered Imp

Image
At a holding control on the 1999 Land's End Trial. Note Siva Llama in the background This car resembles VT No.49 in many ways but has a Ford Pinto engine. Listed as a 2-litre in the entry for the 1999 Land's End Trial, it was built by built by Martin Harry to be driven by his wife Julia and boy did she give it some stick! It proved to be very effective and impressed me when taking my Siva Llama out for the first time. I don't know it's constructional details as we were running late and pushed for time when we eventually caught up with it. I have a feeling a Beetle gearbox was used and someone told me it also used Beetle rear suspension. Not seen on the hills for a while, I believe it stills exists way down Camborne way and will one day take to the hills again.

LVVS 2010 open day

Image
What have you got in your shed? Other people's work-in-progress is always fascinating Ever since dropping in on this pioneering society's museum last year, I've wanted to visit their open day when they open up the big doors and drive their buses all around the city of Lincoln. Not only that but a load of their mates bring their buses and coaches over as well. In the end I got a good deal on rail travel (two singles were cheaper than a return and way cheaper than driving up) and went up for a couple of nights to get my fix and see the Imp in the cathedral. As a supporter of lost causes, I was very pleased to see that someone else cares about the Austin Gypsy. The Lincoln Vintage Vehicle Society have been setting the standards of commercial vehicle restoration for decades. Looking around their workshops was particularly interesting for me. There was an early Austin Gypsy with rubber suspension - later ones had cart springs and fell victim to BL's post-merger rati...

A visit to Sammy Miller's Museum

Image
On my way back from the Goodwood Revival I thought I'd drop in on Sammy Miller's museum at New Milton. I'd been to the old one (at Old Milton?) years ago and thought I'd be there half a day. In the end I was there all day and could've stayed longer. There's so much to see. This Moto Guzzi is just one of the treats in store at Sammy Miller's Museum It was as I was examining this lovely Guzzi - even before entering the museum proper - that a chap in a blue coat asked me to lend him a hand in the workshop. Of course, I knew it was Sammy. Even if I hadn't, he'd been racing bikes at Goodwood a couple of days earlier in leathers with his name across the shoulders. I think he was working on the recently re-discovered works Ariel and just wanted me to rest it on some axle stands while he lifted it, so I naturally obliged. I could also see he was busy so didn't try to distract him with idle banter. That's the way I am when I wanna get on but as ...

2010 Goodwood Revival

Image
At  a very early age I was dropped on my head in a Ford Anglia like this so it's a mystery why I don't have one of my own. My parent's car was 119FBP. If this car had been re-registered I wouldn't have recognised its it significance. It's taken me a while to get my thoughts in order about the 2010 Goodwood Revival. I enjoyed it very much and adapted to my self-appointed role of 1950s cad with relish but there was something about the event that left me with a sour taste in my mouth. I reckon it was the split paddock with its exclusion zone penetrable for people on various corporate entertainment deals and members of the Goodwood Road Racing Club. Not being part of either, I found myself barred from some parts of the paddock. Hooray Henries and Henriettas could freely waft stylishly in and out and not take the slightest interest in the rolling sculpture around them. They fact that they were there was all that mattered. Merchant bankers could catch up with conta...

Vintage Thing No.77 - 1947 EMC 350

Image
Similarities in layout to the Trojan split single are clear but the conrods of the EMC 350 aren't designed to bend. I've written about Trojan engines on this blog before, wondering if they could have had any sporting potential. I've a soft spot for two strokes and supercharging them sounds very exotic - almost impossible - and something to crow about if you can do it right. Dr Josef Ehrlich came from Austria and settled in post-war Britain to develop his take on the DKW blown two strokes that had made such an impression before the war. Unlike the Trojan, which used a flexible single vee-shaped conrod for the two pistons, Dr Joe used a stiffer one with an articulated link that allowed the pistons to travel happily in their separate cylinders without the need for said spindly vee-shaped conrods to flex. Based in Isleworth in the London borough of Hounslow, EMC never entered quantity production but were available from 1947 to 1952. After that Dr Ehrlich concentrated on...